What kind of anti-rockers are best???

[Fuck Newbz]

Again, I value your opinions... I just want to pick the right one. Maybe not the right one, but a good one.

[Emiger]

I really like my plastiks

[oompaloompa]

gc3s dude i skated my friends deshis which had gc3s on em and they stick onto the rail so good dude its amazing i grinded a 60 foot long rail but i had to get tons of speed but def gc3

ground control (murda) 2
and ground control 3

[Will]

None of the above. UHMW antis are my personal favorite, the wear is minimal and they slide better than any urethane ever will.

[Fuck Newbz]

None of the above. UHMW antis are my personal favorite, the wear is minimal and they slide better than any urethane ever will.


and they grind stones are UHMW

[Will]

Yeah, but they only work with kizer axels, so I couldn't give them my vote. The night ones work on 8mm and 6mm axels, so if they were on the list they would win in my book.

[Fuck Newbz]

Aren't the night ones a lot of money though :?

[Nowhere-NM]

Anti rocker wheels are anti rocker wheels. Get whatever is cheapest.

[Fuck Newbz]

I have GC frames, so if I want the gc3 wheels, don't I need to buy the gc3 h-block??? Or can I just put the wheels in

[Fuck Newbz]

Bring this back to the top of the board. :D

[chrisperritano]

plus the night ones are black. they get my vote.

[therailnutter]

i would do the night UHMW rocks.

[chrisperritano]

yeah night is awesome

[Fuck Newbz]

I have GC frames, so if I want the gc3 wheels, don't I need to buy the gc3 h-block??? Or can I just put the wheels in


Could someone please give me an answer... If I don't need to buy the complete h-block, I will buy these because they are the cheapest by far... and how much do night run/where can I get some???

[chrisperritano]

ythey are a bit thinner than normal, but you dont NEED the hblock, they will just move side to side a little bit. i wannag et them for my ables but i need a way to figure out the hardwear stuff.

[Will]

ythey are a bit thinner than normal, but you dont NEED the hblock, they will just move side to side a little bit. i wannag et them for my ables but i need a way to figure out the hardwear stuff.

Well http://aggressivemall.com begs to differ.

replacement wheels for your 3rd gen H block, or spice up your set up with a new color.

NOTE: these will only work with Ground Control 3rd Gen H blocks & Ground Control frames.

[Fuck Newbz]

ythey are a bit thinner than normal, but you dont NEED the hblock, they will just move side to side a little bit. i wannag et them for my ables but i need a way to figure out the hardwear stuff.


Thanks Ian, now I made my decision... plus they have 3 votes

[NotCalebSheridan]

http://bob64.binuweb.com/CALEB%20FGT/wheel12.JPG
http://bob64.binuweb.com/CALEB%20FGT/wheel9.JPG

those are UHMW, i made them like will's... i can make you a pair, im me

[chrisperritano]

ythey are a bit thinner than normal, but you dont NEED the hblock, they will just move side to side a little bit. i wannag et them for my ables but i need a way to figure out the hardwear stuff.

Well http://aggressivemall.com begs to differ.

replacement wheels for your 3rd gen H block, or spice up your set up with a new color.

NOTE: these will only work with Ground Control 3rd Gen H blocks & Ground Control frames.
w
ell fuck them. they say that so they can get the extra 10 bucks or what ever it is for a chuck of plastic known as an hblock

[Fuck Newbz]

ythey are a bit thinner than normal, but you dont NEED the hblock, they will just move side to side a little bit. i wannag et them for my ables but i need a way to figure out the hardwear stuff.

Well http://aggressivemall.com begs to differ.

replacement wheels for your 3rd gen H block, or spice up your set up with a new color.

NOTE: these will only work with Ground Control 3rd Gen H blocks & Ground Control frames.
w
ell fuck them. they say that so they can get the extra 10 bucks or what ever it is for a chuck of plastic known as an hblock


its $20

[chrisperritano]

no, 15 for wheels, 25 for hb and wheels, aka , 10 bucks more.

[Fuck Newbz]

no, 15 for wheels, 25 for hb and wheels, aka , 10 bucks more.


Well, I'm talking skatepile... $9 for wheels and $30 for h-block

jesus christ its not gonna make any difference. an antirocker wheel is an antirocker wheel. just get whats cheap. its not gonna make a difference in your performance.

[yes it does]

not true. UHMW is far better than anything else. the Night ones seem to be the best by far. no bearing so less weight and they work in all frames. they cost $29 in Roller Warehouse.

[FRNBITCH-NLI]

why dont you pussies just skate flat and stop cheating.
Clay Bowers---Flat Rocker Nazi

[mvskater12]

i agree with that kid skating flat rocker is cheaper and its so much easier to learn new shit

[iglue2]

i would get the rachards cause its red!!!

and MOST DEFINITELY not the kizer grindrocks

[leiftheviking | phc]

I really like my plastiks

Omg. This is the last post he made before leaving here. :cry:

[JAB]

I'm getting night antis for my fiziks in a couple of days! :)

[Turnip Head]

I really like my plastiks

[RobFromFlint]

why dont you pussies just skate flat and stop cheating.
Clay Bowers---Flat Rocker Nazi


Yes clay, cause you are such a fucking Nazi. lmao, this is Rob

[Dielawn]

Way to top the OLDEST TOPIC EVER. hahahaha

There's so many old people in here that don't post anymore. :cry:

[Heath]

Undercover richie eisler anti's there liek the crayola ones there fucking awsome

[Grasshoppa]

haha

[Honni]

uhmw antirockers are by far the best..

[swollenshins]

m1.




obviously

[8=====D~~~]

m1.




obviously

way to ressurect a pointless thread

fucking cunt

[8=====D~~~]

lawl. she put me on ignore.

[Emiger]

I really like my plastiks

[bklyn1484]

M1 anti's are the best i think..i have them on my valo's and nothing bad about them yet..