Circle jerk (Pic)

[Special ED]

Those xsjados ARE sick! Unfortunately, I traded mine up. Too bad the mints are large.

http://i103.photobucket.com/albums/m128/omfgspecialed/eb969ddf.jpg

[HollyBoni]

NIICE Special Ed!

get some farmer moccasins,and thrown them into the xsjado's! they will look SICK!:)

[Special ED]

Oh no, I traded up to carbons. Xsjados didn't do it for me and switch_bcn was kind enough to find someone who felt the same about their Kelsos. They skate amazing, I feel much more confident in my motions now.

[Monday]

Nice Carbz, Ed. Good wheels, too... ;)

[sbchugo]

New core on those uc pro, they roll faster!!

[Special ED]

They are pretty fast. I had the wellsmores, but the centre of the core was .001 mm too thin and the bearings would shift ever so slightly. Seemed to come up on a lot of park compounds in the shop, so I went with the howards. I originally wanted them anyway. I think I am getting Soichiro GCs next week to spare my 5050s for summer, should look good.

[Monday]

New core on those uc pro, they roll faster!!Yup... 8)

[Special ED]

Changed them up. They were setup with what I had already put together. So I swapped in some black buckles that came on some thrones, black laces(deshi haha) and straps from my CH1s, grey cuff bolts, and Kelso COs. Upon further inspection, I realized that while still warped, they were not nearly as warped as my grey COs. So I am fine with that for now.

http://i103.photobucket.com/albums/m128/omfgspecialed/ed6bbc26.jpg

[2souler]

thanks guys....really loving the way they look and will skate them tommorow with the freestyles for the first time. Realy like the way they turned out, i haven't seen anyone rock them this way, but im sure there has been. took better pics without the "effect" which i only used because my cell phone has a shitty camera. will post later.

To avoid crack slowing you down ......wont shaving some of the lower part of the frame with a dremel solve that.....

note: rollerwarehouse and amall told me they hold up to 58 mm wheel. i just put in brand new m1 59mm dual duro on they fit with more than enough room....60 lomax wheels will deff fit. with liitle help from mr dremel...

[2souler]

http://us.mg5.mail.yahoo.com/ya/download?fid=Inbox&mid=1_6173_AMhVimIAAR7HTt7cTgqp2iA%2BkBE&pid=2&tnef=&YY=1324072542810&file_name=Photo0055.jpg

last setup i had

[a_pla5tic_bag]

new fluid 4's with undercover antis. now i just need to wait for those new eulogy wheels.
http://i1219.photobucket.com/albums/dd424/lolmywallets/IMG_1724.jpg

[HollyBoni]

Those Fluid 4's look so sexy! Maybe they will be my next frames.

[Monday]

Skating them atm. They are ridiculous. I don't like the groove and their height, but boy are they fast...

[philthyphilly]

http://i1204.photobucket.com/albums/bb416/philthyphilly/Snapbucket/C19BB81F-orig.jpg

winter skates so i don't ruin the xsjado's in the wet

[klebanironcross]

http://plus4chan.org/b/jam/src/130397421824.jpg

[MattyNairn]

All black and all white Nimh setups. Denial Wojda wheels and O'Neill liners in the Shamans, Street Artist white team wheels and Sagona Liners in the V2's, BHC anti's on both.

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/9619D787-orig.jpg

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/7453DFA6-orig.jpg

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/7269DBDB-orig.jpg

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/0627B1FA-orig.jpg

[sbchugo]

No buckle???

[MattyNairn]

Remz straps, velcro tingz.

[HollyBoni]

So oldschool!

[!!!]

those nimhs are fucking sick, including the velcro but minus the featherlights.

[USD_Dave]

Both those Nimh setups are so sick, minus the frame setups and liners I have had those same boot setups at one time or another. You should try get your hands on a set of the white cuffs for the V2's.

I'm interested in how they skate with the Remz straps instead of the buckles, I'm sure I've got a set lying around somewhere so I may give it a shot sometime.

[USD_Dave]

Picked these up a couple of months ago for £20 ($31) boot only and finally completed my Nimh collection!

http://i8.photobucket.com/albums/a3/razor_dave/Snapbucket/5C1DE6C1-1.jpg

Hopefully in a few weeks I'm going to pick up the new Montre's which will be my first brand new pair of skates in 2 years since I've just been hunting down all the Nimh's I could and getting some really good deals.

[MattyNairn]

I've got some white cuffs, but they don't look right on the white skins for some odd reason. tbh, the only reason I put the remz straps on was because I was catching my shins on the buckle receptor when i did pornstars. Otherwise it might give you a bit more forward flex, but I havn't noticed anything else.

Sick Oli Shorts btw, I had a very similar setup on here if you go back a few pages.

[Monday]

All black and all white Nimh setups. Denial Wojda wheels and O'Neill liners in the Shamans, Street Artist white team wheels and Sagona Liners in the V2's, BHC anti's on both.

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/7269DBDB-orig.jpg

http://i1131.photobucket.com/albums/m554/MattNairn/Snapbucket/0627B1FA-orig.jpgWhite ones are sick!

How are the Denial Wojdas compared to the STARs?

[crizzle]

I dont know why this isnt loading, but here is a link
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/389910_10150432881852535_584172534_8513263_1424237 693_n.jpg

white COs are about to be Blood Red

[USD_Dave]

I've got some white cuffs, but they don't look right on the white skins for some odd reason. tbh, the only reason I put the remz straps on was because I was catching my shins on the buckle receptor when i did pornstars. Otherwise it might give you a bit more forward flex, but I havn't noticed anything else.

Sick Oli Shorts btw, I had a very similar setup on here if you go back a few pages.

I think they look fine with white cuffs, well mine and my friends pair both did. Might just stick with the buckles then, I've got no problem with the forward flex and I also like my skates tight. Laces done all the way up and buckles tight as hell is perfect for me so the straps probably wouldn't be a good idea.

Thanks dude, glad I finally managed to get a pair and for so cheap!

[HollyBoni]

Those Carbon 3's are so ugly. Not the setup,the skate. I don't like 'em. :-?

[Monday]

Seen 'em in person? They're pretty sick...

[wormy]

So oldschool!
you are stupid as fuck!! are you aware of that !!

[HollyBoni]

you are stupid as fuck!! are you aware of that !!

Hey,relax man!:neutral:

[MattyNairn]

White ones are sick!

How are the Denial Wojdas compared to the STARs?

The frames, liners, and wheels on the whites are all new, so i havn't skated the STARs yet. The denial wheels are wierd because i thought they were going to skate like M1's being 93a, but they grip really well, as i've been skating park mostly since i got them, must be the round profile of them. I got the STARs because they were white and matched that setup, haha, they are the same as UC so i don't hold much hope for them, cheap though.

[MattyNairn]

Hopefully in a few weeks I'm going to pick up the new Montre's which will be my first brand new pair of skates in 2 years since I've just been hunting down all the Nimh's I could and getting some really good deals.

I found the Montres on ThisIsSoul for around 90quid, was going to get them but they sold out of the size 6's before I could. All the shops in the UK are a bit overpriced compared to the euro shops. Where you getting yours from?

[Monday]

[…], they are the same as UC so i don't hold much hope for them, cheap though.:-|

[USD_Dave]

I found the Montres on ThisIsSoul for around 90quid, was going to get them but they sold out of the size 6's before I could. All the shops in the UK are a bit overpriced compared to the euro shops. Where you getting yours from?

Yeah I saw that too, was gonna get them but like you said they sold out of the 6's. I'll be getting my grey Montre's from Loco as £189 for a full setup with CO's and 8 wheels is more than reasonable IMO. I probably won't even use the wheels though because they're too small plus I have a set of brand new UC's still, but 16 bearings will always come in handy. When the boot only price of the first Montre's comes down some more I'll probably grab a pair.

[gatsby]

erick garcia's jams, off of facebook

http://i44.tinypic.com/a4wg7k.jpg

[rollerblazed]

saw those too ^ so sick

[Kent]

Those are hot. I've always wanted to try some K2s

SOON

[Pulp]

Ordering my custom JC Rowe boots today. :cool: Will post pics when they get here, of course.

[sequoiad]

does anyone know what the K2 shell sizes are like and if they fit true to size? im looking at geting a pair of 2011 fatty's and slapping on either the carbon or varsity souls, and usually skate a UK9.5, US 10.5, EU44 in most skates

[resuk]

size us 10
Blacked out Browkows,
Brown fluid 3's
Denial Wojda's, so grippy!
UC grindwheels 46mm
sinisters, i know there big, but while skating i cant see it cuz of teh pantz.

http://img341.imageshack.us/img341/7039/valosetupresukblackbros.jpg

[Pulp]

size us 10
Blacked out Browkows,
Brown fluid 3's
Denial Wojda's, so grippy!
UC grindwheels 46mm
sinisters, i know there big, but while skating i cant see it cuz of teh pantz.

http://img341.imageshack.us/img341/7039/valosetupresukblackbros.jpg
DAT

[HollyBoni]

SO HOT! Denial wheels for the win

[Monday]

Indeed...

[klebanironcross]

They're just generic wheels. Same as shredweiser and a couple of other "brands"

[themoller]

my current setup:
09 damien wilson xsjados small shell
salomon frames small size
scott crawford COZMO wheels
killer bees ABEC 5 bearings
reebok classic running shoes
(I plan on getting real black soul plates if the 2.0 soul plates ever come out)

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj3.jpg

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj2.jpg

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj1.jpg

[Monday]

Why dey Cozmos black huh?

[Dr. Zaius]

I hope your ankles don't turn blue.

[John X Campbell]

early christmas present to myself
pretty generic setup,
my first pair of xsjados
blue stockwell 3's
black GC featherlite 2's
haffey 4x4 wheels
abec 5 bearings

nothing to special
http://img.photobucket.com/albums/v200/johncampbell/photo-5-2.jpg

[4x4BooZer]

New 2pc souls, COs, UCs, Bone Swiss, SWS antis, & fifty/50 chrome bolt tech

http://farm8.staticflickr.com/7016/6542726855_5d3a210eb8_z.jpg

[Village Idiot]

nice valos.

[sbchugo]

Why dey Cozmos black huh?
Exactly THIS!!!! why?? Never seen them in black....

[HollyBoni]

Found on facebook. SICK!

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/307869_235524559833231_100001270654001_805091_9159 27630_n.jpg

[domi]

my current setup:
09 damien wilson xsjados small shell
salomon frames small size
scott crawford COZMO wheels
killer bees ABEC 5 bearings
reebok classic running shoes
(I plan on getting real black soul plates if the 2.0 soul plates ever come out)

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj3.jpg

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj2.jpg

http://i41.photobucket.com/albums/e264/theimpossiblekid/xsj1.jpg

if those are small shells, what size are you?!

[Special ED]

Found on facebook. SICK!

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/307869_235524559833231_100001270654001_805091_9159 27630_n.jpg

True story, I was going to get close to the same setup to match a car I almost bought haha.

[fast eddie]

does anyone know what the K2 shell sizes are like and if they fit true to size?

K2's used to fit true to size, but it seems that they actually run a half size bigger.

For example, my decade old 250ccs and King 55s are an 11 US and they fit snug, but good.

My 2009 Fatty Pro's and Varsity's are/were also 11 US, but they feel/felt a bit too big. About a half size too big.

[sbchugo]

Setup of my friend ; USD VII DUstin Latimer UFS edition :)
http://i359.photobucket.com/albums/oo35/hug33/00fd965c.jpg

[HollyBoni]

I think VII's are ugly,but DAT VII IS SO SEXY

[justinthursday]

UFS Edition?

[klebanironcross]

Nomnom

[Steveig]

Setup of my friend ; USD VII DUstin Latimer UFS edition :)
http://i359.photobucket.com/albums/oo35/hug33/00fd965c.jpg

nice....!!!

[sbchugo]

UFS Edition?
http://i359.photobucket.com/albums/oo35/hug33/usd-throne_latimer02.gif

[Special ED]

http://media.tumblr.com/tumblr_lvmvtdkHVv1qbxs9y.jpg

[themoller]

Exactly THIS!!!! why?? Never seen them in black....

set them in black dye:)

[rnc]

set them in black dye:)

freak!

[Monday]

Me gusta

[rnc]

finally...

http://img263.imageshack.us/img263/4165/dscf1288h.jpg

[Dr. Zaius]

god damn that brings me back. I learned back royales in those skates. So sick!

[Monday]

http://s3.imgimg.de/uploads/fag660b3b7ajpg.jpg

^ The homies setup

Pre-production glossy-black JJ Light skins, GC F1 XS size M, custom "FUCK USD" ankle straps.

[sbchugo]

¿¿??¿¿
All black looks so good.. Sample skin so??

[Village Idiot]

I spray painted my valo skins black, they look the same. shit, i should post a pic of my setup.

[Monday]

Nah, they are painted... But it looks really nice and made the skate 200 % more cool. Also that paint can take a beating. Me gusta...

[chamm0nd04]

http://i1085.photobucket.com/albums/j423/chamm0nd04/IMG_20111222_181032.jpg

new usd liners and attempting to roll flat

[justinthursday]

http://i359.photobucket.com/albums/oo35/hug33/usd-throne_latimer02.gif
Still doesn't make any sense.

[justinthursday]

OHHH YOU MEAN THE COLORS???

[justinthursday]

Cause they were both UFSSSSSS. So it still doesn't make sense.

[Monday]

http://i1085.photobucket.com/albums/j423/chamm0nd04/IMG_20111222_181032.jpg

new usd liners and attempting to roll flatThose wheels aren't even fun for flat... Sooooo sllloooowwww....

[sbchugo]

Cause they were both UFSSSSSS. So it still doesn't make sense.
It s the colorway dude!! I know both are ufs thanks :!!! I blade since 93 so I know exactly wich skate is ufs or not !!!

[chamm0nd04]

that felt nice to me...and easy faster then rolling with two wheels

[Monday]

Well, I've had them on my Salomons in '98 and I didn't like them... :) But if they're okay for you then that's fine... :)

[chamm0nd04]

Well, I've had them on my Salomons in '98 and I didn't like them... :) But if they're okay for you then that's fine... :)
i bought the wheels used from mr.thursday to try out rolling flat with out throwing out 60 bucks to find out i didn't like it

[Monday]

+rep for trying flat

[Monday]

ATTENZIONE: Yo guys if any of you wantz (or have someone that wantz) a pair of EU 43 Carbon Free Teams then hit me up. Very lightly used (you know I can't skate for shit). Boot Only or Complete. I hook you up. Ships from Germany.

[Nico]

monday...how did u paint the skin?does it resist with ur skating?let me know..i wanna do it too!

[Monday]

Not my skates... I'll find out which paint was used and send you all info needed... :)

[justinthursday]

that felt nice to me...and easy faster then rolling with two wheels


Well, I've had them on my Salomons in '98 and I didn't like them... :) But if they're okay for you then that's fine... :)
Maybe now that they're so old and cured they're better. I thought they were pretty good the couple times I rolled them!

[Monday]

Might be... :)

[s.]

http://s3.imgimg.de/uploads/fag660b3b7ajpg.jpg


:oops:

[CL347BV]

http://i223.photobucket.com/albums/dd95/vandebe/c070c9c1.jpg

[Pulp]

https://mail.google.com/mail/?ui=2&ik=40fb0fb14c&view=att&th=134765516d2981cc&attid=0.1&disp=inline&zw
USD Carbon 2's
USD Zamora Throne buckles/cuffbolts/insoles/shock absorbers
Kizer Fluid 4
Undercover Eisler
Bones Swiss 6
Valo anti's

[Monday]

http://i223.photobucket.com/albums/dd95/vandebe/c070c9c1.jpgnice

[justinthursday]

http://i223.photobucket.com/albums/dd95/vandebe/c070c9c1.jpg
Epic.

[CL347BV]

Haha thanks guys, haven't slated on them just yet, hope to very very soon.

[fast eddie]

http://i111.photobucket.com/albums/n153/dangerzone949/VAM_2417.jpg
http://i111.photobucket.com/albums/n153/dangerzone949/VAM_2419.jpg

I sprayed all of the non-white areas with a rubber truck bed liner. The skates were sitting in some dudes shed in Arizona for over 10 years, certain parts of the skates started to deteriorate. The truck bed liner worked wonders and is super resistant to abrasion.

I taped everything off with masking tape, but some seeped through. Kinda pissed because I can't get the stuff off where it isn't supposed to be, but these things skate beautifully. The King 55s really needed cuffs, if you weigh more than, say, 170 lbs. These are actually pretty heavy skates. But I don't notice it.

I switched the instep strap on the left skate after this bottom photo, hurpaderp.

[justinthursday]

http://i111.photobucket.com/albums/n153/dangerzone949/VAM_2417.jpg
http://i111.photobucket.com/albums/n153/dangerzone949/VAM_2419.jpg

I sprayed all of the non-white areas with a rubber truck bed liner. The skates were sitting in some dudes shed in Arizona for over 10 years, certain parts of the skates started to deteriorate. The truck bed liner worked wonders and is super resistant to abrasion.

I taped everything off with masking tape, but some seeped through. Kinda pissed because I can't get the stuff off where it isn't supposed to be, but these things skate beautifully. The King 55s really needed cuffs, if you weigh more than, say, 170 lbs. These are actually pretty heavy skates. But I don't notice it.

I switched the instep strap on the left skate after this bottom photo, hurpaderp.
Nice dude. I've been thinking of using something like that spray on my Carbon skins in weak areas.
I was thinking the stuff that you dip tool handles into.
But the spray sounds way more practical. Can't believe I didn't think of it!

[mmmartin]

http://www.skatesetup.com/images/skate/large/ad1abfd59aeab29ceabd3d181a03c09a.jpg

Custom TRS Carbon Morales
RB Solo cuff & velcro buckle
RB Blank liners
USD Psirus shock absorber
USD Carbon soulplate
Kizer Fluid 4
Eulogy Lievanos
2nd Regime Plastics

:-D

[zacharias]

http://i918.photobucket.com/albums/ad26/zacharias/IMG_0902.jpg
http://i918.photobucket.com/albums/ad26/zacharias/IMG_0909.jpg

Snagged em off ebay for cheap and have only skated em once but holy hell I wish I bought these years ago.
I cut off the varsityness and took off the fabric around the cuff....the paint job was all the previous owner....kinda like :?....

[mmmartin]

http://www.skatesetup.com/images/skate/large/ad1abfd59aeab29ceabd3d181a03c09a.jpg

:-D

[Village Idiot]

osm.

[EN¿GMAsynthetx]

finally got the last bits n pieces for my setup:

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0426-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0429-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0430-1.jpg


i actually ordered large frames and got smalls, they feel fine though so i won't bother sending them back.

[domi]

not that the frames are just fine but this is one of the best carbon/carbon free setups I've ever seen! so dope!

[EN¿GMAsynthetx]

thanks domi, i had that setup in mind for a month or so... it's nice to see a plan come together for once! now if the rain would kindly fuck off i'd get a chance to skate them ;)

[Pulp]

Those Carbon Frees are sick, dude. Also, the large CO's are like limousines. Be glad you got smalls.

[psyconic]

http://i.imgur.com/XTVp3.jpg

My new setup. I just couldn't get past the pain the OS's were givin me. These super comfy.

[CL347BV]

Os's you say? What size? I'm looking for some os's and have salo's to possibly trade.

[psyconic]

The OS's are 11's but, I removed the toebox strap in an attempt to fix the pressure point problem I was having.

[justinthursday]

http://i918.photobucket.com/albums/ad26/zacharias/IMG_0902.jpg
http://i918.photobucket.com/albums/ad26/zacharias/IMG_0909.jpg

Snagged em off ebay for cheap and have only skated em once but holy hell I wish I bought these years ago.
I cut off the varsityness and took off the fabric around the cuff....the paint job was all the previous owner....kinda like :?....
AGHH I was watching those and was totally gonna buy but missed them!!!

[zacharias]

They'd probably be too big for you. They are slightly bigger than a sz. 7 carbon 2/ carbfree. I almost think I could fit a 6.5 but would probably hate that decision for a month or so. They are soooooooooo comfortable, no pressure points at all. For sure gonna be getting the new ones.

[zale]

That Carbon free setup is crafted by gods.

[sbchugo]

Are you ready :)
perfect fit of the h block. we have made the H block like the Kaltik flat. More pics soon and first session soon :) Advance 2.0 ?? :)
http://i359.photobucket.com/albums/oo35/hug33/photo12-1.jpg

[Monday]

^ That's what I meant when I said "For Kizer, a frame is a frame is a frame..."... ;)

[HollyBoni]

finally got the last bits n pieces for my setup:

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0426-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0429-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0430-1.jpg


i actually ordered large frames and got smalls, they feel fine though so i won't bother sending them back.


Seriously,best setup i've ever seen. :neutral:

[justinthursday]

They'd probably be too big for you. They are slightly bigger than a sz. 7 carbon 2/ carbfree. I almost think I could fit a 6.5 but would probably hate that decision for a month or so. They are soooooooooo comfortable, no pressure points at all. For sure gonna be getting the new ones.
Nice. Let me get those when you get the new ones!

[Davengo]

Are you ready :)
perfect fit of the h block. we have made the H block like the Kaltik flat. More pics soon and first session soon :) Advance 2.0 ?? :)
http://i359.photobucket.com/albums/oo35/hug33/photo12-1.jpg

that is pretty fucking stupid.

[sbchugo]

that is pretty fucking stupid.
why fucking stupid?? roll 1000 times faster, more maneuvrability and be able to grind sound stupid ?? No I don t think so.

[Pulp]

why fucking stupid?? roll 1000 times faster, more maneuvrability and be able to grind sound stupid ?? No I don t think so.
I don't think stupid is the right word. I think "irresponsibly impractical" sounds about right.

[Monday]

http://www.be-mag.com/msgboard/showthread.php/676-ಠ_ಠ?p=874845&viewfull=1#post874845

[EN¿GMAsynthetx]

http://puppsfreestuff.com/files/AladdinGenieJawDrop8fLG.gif

[sbchugo]

I don't think stupid is the right word. I think "irresponsibly impractical" sounds about right.
Ok give me a week to find some good weather and make an edit. We speak about the "irresponsibly impratical" next week.

[zale]

Those gold ones are fucking sick, black/red are awesome too!

[Monday]

http://www.be-mag.com/msgboard/showthread.php/676-ಠ_ಠ?p=874951&viewfull=1#post874951

[szymon034]

finally got the last bits n pieces for my setup:

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0426-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0429-1.jpg

http://i72.photobucket.com/albums/i178/ytsejams20/DSC_0430-1.jpg


i actually ordered large frames and got smalls, they feel fine though so i won't bother sending them back.

Love them.

[Basza]

http://img828.imageshack.us/img828/7685/setup12012.jpg (http://imageshack.us/photo/my-images/828/setup12012.jpg/)

Valo Lights with older Velcro skin, GC Ftl 2 frame, Street artist wheels, Them goods bearings

[Village Idiot]

i'd love to see those with the new 2 piece souls.

[Basza]

two-pice souls are not available in white , only really really light grey so I though I would stuck with the classic souls. I think they are much faster and more durable than the new ones

[resuk]

The new 2 piece souls are exactly the same material as the old ones, just a bit wider, if anything the would last longer...

[adam samurai | PHC]

http://i1204.photobucket.com/albums/bb411/Adam_Cox/DSC05335.jpg

almost finished. waiting on buckles from germany and i may put those frames on my vinny's i'm working on.

[justinthursday]

http://i1204.photobucket.com/albums/bb411/Adam_Cox/DSC05335.jpg

almost finished. waiting on buckles from germany and i may put those frames on my vinny's i'm working on.
Feinbergs looks so good with grey souls!
I did some for mine but cut them to fit like stock souls.

[rnc]

http://i1204.photobucket.com/albums/bb411/Adam_Cox/DSC05335.jpg

almost finished. waiting on buckles from germany and i may put those frames on my vinny's i'm working on.

nice setup.. what about frame-matching laces?

[domi]

http://i1204.photobucket.com/albums/bb411/Adam_Cox/DSC05335.jpg

almost finished. waiting on buckles from germany and i may put those frames on my vinny's i'm working on.

what buckles? salo buckles are one of the best. what are you changing them for?

[FLaSHBaCK]

Decided to try anti rocker one more time. Picked up some dyna's and some bones labyrinth. Finally found a legit setup that i'm comfortable with.
http://i19.photobucket.com/albums/b171/atastyfart/4274f39d.jpg
http://i19.photobucket.com/albums/b171/atastyfart/cc958118.jpg

[adam samurai | PHC]

what buckles? salo buckles are one of the best. what are you changing them for? i'm getting longer salomon buckles.

[Basza]

The new 2 piece souls are exactly the same material as the old ones, just a bit wider, if anything the would last longer...

dude, I don`t agree at all. yeah the back part maybe the same material yet the front plate is way different. I wore down the two piece in half year. With the classic one - I didn`t change the soulplates at all until I got new skate. The problem with the two piece is that you are grinding with your whole soulplate surface, with the classic one the soul wings stick enough so you slide only on them - it`s so much faster

[domi]

not to mention, the two piece valo souls look really wack and even more boatish. I also prefer the old ones

[sbchugo]

I don't think stupid is the right word. I think "irresponsibly impractical" sounds about right.

We have try those improve advance frames today : savanah (front tork and many more..) on a curb sounds "irresponsibly impratical" ???? Edit in the next weeks on the powerblade website :)

[Davengo]

why fucking stupid?? roll 1000 times faster, more maneuvrability and be able to grind sound stupid ?? No I don t think so.

Yeah cause doing royales on frames that tall are gonna feel sick. Right. Genius even.

How is some regular frames like 50/50s, 55mm flat, with swiss bearings gonna be any fucking slower than your retarded set up without sacrificing your ability to grind? And it'll be noticeably lighter also. How much did that cost you? Nearly 200 dollars I bet and thats not even including the actual boots.

That is retarded man.

powerblading fine... I understand. Skating around town hauling ass and doing stair rolls and skictchimg is great. I thought it was to step away from the grinding aspect not put h blocks so you can make doing royales fucking impossible on frames CLEARLY not designed for boot tricks. You and every other trend hopper is spitting on the last 15 years of rollerblading progression with that shit.

I bet you had like 5 kendemas.

[Davengo]

"DUDE CHECK OUT MY EDIT. I TOTALLY DID A BACK FARV ON THESE STUPID ASS SKATES. IT TOOK ME ABOUT A WEEK. I DON'T EVEN WANNA BEGIN TO LET YOU KNOW ABOUT MY SICK KIND GRIND"

[domi]

why all the hate? tell the powerhouse guys that these are not for grinding. I think, they know it well. But some occassional grinds sound like fun. so why not have a bit more bit bite protection? These h-blocks seem like a great addition to the advance frames.

[*ROYALwithCHEESE*]

Why all the hate?

It makes you feel important.

[sbchugo]

Yeah cause doing royales on frames that tall are gonna feel sick. Right. Genius even.

How is some regular frames like 50/50s, 55mm flat, with swiss bearings gonna be any fucking slower than your retarded set up without sacrificing your ability to grind? And it'll be noticeably lighter also. How much did that cost you? Nearly 200 dollars I bet and
That is retarded man.
I bet you had like 5 kendemas.

It cost me pretty much nothing i m a retarded man who roll for a local skateshop. 200 it s what I pay for a full setup because I ve some C3 for powerblade and some for regular blading. PLEASE INSERT HATE !!!!
I never had kendamas it s so stupid!!
Dude when you ll have 30years old I m sure you ll understand me. So for me the h block we add is just to make a few grinds during a freeskate session. Now fuck you with all your hate because if you say that you never try rec or pb frames and can t understand us. Now move hate away or put all this hate into your skating faggot

[sbchugo]

Why all the hate?

It makes you feel important.
This . He s happy to hate the froggy of the board, plus my english is super bad I can t explain and reply like I want.
Davenfaggot

[Monday]

:mrgreen:

[klebanironcross]

Got these beauties yesterday. didnt finish setting them up yet. A huge thanks to Leon over at Shop-Task for hookin it up.

http://i641.photobucket.com/albums/uu132/klebanironcross/IMG_2706.jpg

[Davengo]

I just don't get it unless I'm being trolled by the whole rollerblading community.

Lol about if I've never "rec" before I won't understand "us".

So you guys are THE powerbladers now?

Anyway I don't need to TRY pb frames or whatever they are called because I've been skating flat for a long fucking time and I never shove that shit in anyone's face and I fucking HAUL ASS. Jesus I'm not even trying to bring age into this but if you are 30 years old don't even try the old sage routine cause wisdom is obviously not on your side if your drilling ground control 1 h-blocks (2001 technology) into "power blade" frames (1994 technology) and telling me how cool it is.

Look at fucking Tim Adams for example. LOOK AT HIM. Look at what his skating is all about. He's been powerblading since before powerblading was invented with normal frames and wheels flat set up.

It's not hate man that Hblock shit is just stupid. You should just skip 70mm altogether and try to grind with bicycle tires.

[rnc]

Got these beauties yesterday. didnt finish setting them up yet. A huge thanks to Leon over at Shop-Task for hookin it up.

http://i641.photobucket.com/albums/uu132/klebanironcross/IMG_2706.jpg

so nice. love dem black deshi carbons.

[Monday]

Got a minty EU 44 black pair for sale!

^ Just in case...

[sbchugo]

Davengo stfu and go hate away or go hate on your bladezz

[rnc]

Got a minty EU 44 black pair for sale!

^ Just in case...

yes, sir, i know ;) but due to mis-sizing i need a 45.. and have some in white.. torn apart... new costum carbons.. soon ;)

[Monday]

;)









I need new bladez, too... But what to get?

[rnc]

how 'bout some like new salomon ST pros? need to get rid of these befor i can't stand it anymore and grind them down to add some descent soulplates ;)

[Monday]

Nah, but thanks...

[domi]

I installed some top strap protectors as I have had enough of my previous xsjados' straps falling into pieces in weeks.
http://img233.imageshack.us/img233/1211/20120106173936.jpg
http://img718.imageshack.us/img718/3290/20120106174435.jpg

[CL347BV]

Is that an RB buckle protector?

[klebanironcross]

No.























its an RB Buckle Protector!

[domi]

Is that an RB buckle protector?

no, unfortunately I didn't have those, but I had a pair of oldschool RB Swindler rear soulwings. i cut down some bits and pieces from it, and screwed that on. Initially I wanted to go with those, I guess those would also fit perfect

[denialchild45]

that's a really smart idea

[Davengo]

Davengo stfu and go hate away or go hate on your bladezz

Sounds like something a mature 30 year old sponsored man would say. Good job.

You can't even try to explain the logic behind "pbing" and try to make me lesser by saying "you don't understand".
I am sure you are a very nice person and awesome to skate with but you just have to realize that you are a tool box.

[Alex Coe]

My new ones, the pic doesn't do justice:
http://i39.photobucket.com/albums/e174/alexcoe/Photoon2012-01-06at2035.jpg
Custom Cults made to look like teema shoos.
Team liners!
Double bucks
1st gen Nimh soles with the huge toe grinded down/off and a sweet groove put in them!
Kaltiks with 60mm face wheels flat

[toe-bee]

this is a setup i put together just for fun/sale*/trade**

http://i42.tinypic.com/2n8tyk7.jpg

size 27.5 / EUR: 43 1/3 / US: 9.5 / UK: 9 b-cam salos
night hardware low profile souls
fiziks frames
senate lowriders

* $3000
** i might actually trade these for some brand new usd carbombs... :wink:

[email protected]

ps. fiziks sale coming up soon!

[domi]

no way :O :O :O best fucking hardboot salo setup ever!

[Monday]

Wheels are no me gusta... The rest is... ;)

[m4rcu5]

My ST8

http://img198.imageshack.us/img198/5449/img7409up.jpg (http://imageshack.us/photo/my-images/198/img7409up.jpg/)

[florian]

http://27.media.tumblr.com/tumblr_lxfg26Ghyn1r4w801o1_500.jpg

speedy gonz

[wormy]

xsjado 2 ??
:mrgreen::mrgreen:

[fast eddie]

ps. fiziks sale coming up soon!


I need axles, got a surplus of them?

[sbchugo]

I need axles, got a surplus of them?

Is it your size ??? oh and cozmo wheels on them I think ?
http://www.ebay.de/itm/K2-King-ultimative-Stunt-Street-Inliner-Boot-/260930292486?pt=Inlineskating_hockey&hash=item3cc0a84b06

[rnc]

before someone asks, he won't give away the wheels seperately... damn it...

[chamm0nd04]

I need axles, got a surplus of them?

don't they just take 6mm axels??

[Village Idiot]

the axel heads are smaller than regular.

[fast eddie]

Is it your size ??? oh and cozmo wheels on them I think ?
http://www.ebay.de/itm/K2-King-ultimative-Stunt-Street-Inliner-Boot-/260930292486?pt=Inlineskating_hockey&hash=item3cc0a84b06

Wow, those are super fresh! Even the black rubber and straps aren't all fucked up or deteriorating, and the tongues! But I'm all set on skates, and would never pay that much for King 55s. I got mine for $30, and had to tear them down and mod the shit out of them.

I don't think I could be bothered to do it again, and I take it pretty easy on my skates so they last a long time.

http://i111.photobucket.com/albums/n153/dangerzone949/photo-3.jpg


don't they just take 6mm axels??

The heads are way smaller. If I can't find more, I'll have to get them machined and that's not cheap :( I mean, I have some extras, but not enough to put together a new pair, and I have enough walls and parts to put together another pair if I could get my hands on some axles.

[marvinc02]

hand full of GC 6mm axles and one long day with a bench grinder will work.

[chamm0nd04]

hand full of GC 6mm axles and one long day with a bench grinder will work.
what he said

[fast eddie]

hand full of GC 6mm axles and one long day with a bench grinder will work.

Have you personally tried it?

[domi]

I did it when I had to replace a lost axle and it didn't take me an awful lot of time

[al dolega]

I've done it. An easier way would be to bring them to a machine shop with a lathe and ask them to turn them down for you. Shouldn't cost you more than a few bucks.

[zacharias]

take 6mm axels put the female end and thread end into a drill chuck(or any other machine with a rotating chuck) so the head sticks out, take a file to them while the chuck is spinning, BOOM! smooth, round and fast.

or what Al said

[chamm0nd04]

http://i1085.photobucket.com/albums/j423/chamm0nd04/2012-01-09_14-37-12_176.jpg
http://i1085.photobucket.com/albums/j423/chamm0nd04/2012-01-09_14-37-54_254.jpg
brand new reign neoprenes

[domi]

^^ wow! that's all I can say for the Reign's and the setup in general.

[Chris Gerard]

My new setup! Special thanks to JC and Al Dolega for the help getting em together!
http://farm8.staticflickr.com/7158/6669380843_2e64642103_b.jpg

[Dr. Zaius]

daaaaamnn I needz them.

Lower those cuff pads breh, they'll (ironically) be more supportive.

[justinthursday]

I need axles, got a surplus of them?


don't they just take 6mm axels??


the axel heads are smaller than regular.


hand full of GC 6mm axles and one long day with a bench grinder will work.


what he said


Have you personally tried it?


I did it when I had to replace a lost axle and it didn't take me an awful lot of time


I've done it. An easier way would be to bring them to a machine shop with a lathe and ask them to turn them down for you. Shouldn't cost you more than a few bucks.


take 6mm axels put the female end and thread end into a drill chuck(or any other machine with a rotating chuck) so the head sticks out, take a file to them while the chuck is spinning, BOOM! smooth, round and fast.

or what Al said


ORRRRR, use GC HiLo axles if you can find them. AMall was selling them for awhile but I don't see them now.

[domi]

My new setup! Special thanks to JC and Al Dolega for the help getting em together!
http://farm8.staticflickr.com/7158/6669380843_2e64642103_b.jpg

so, I reckon that Al was the one to raise the cuff pads that much. have new holes been drilled? what's the advantage of it? extra support would be, of course, my guess

[timi]

http://img202.imageshack.us/img202/963/ssmk.jpg (http://imageshack.us/photo/my-images/202/ssmk.jpg/)

ssm moreno

[Monday]

MY GOD

[Monday]

Perfect...

[Village Idiot]

it's actually incredible how good those skates look.

[salomonskater]

My new setup! Special thanks to JC and Al Dolega for the help getting em together!
http://farm8.staticflickr.com/7158/6669380843_2e64642103_b.jpg

:shock: Best looking Xsjado's, post them on skatesetup.com.

[al dolega]

ORRRRR, use GC HiLo axles if you can find them. AMall was selling them for awhile but I don't see them now.

Those things suck. The tool holes are about a tenth of a millimeter deep, so they strip very easily; and the threads are super shallow, so they strip extremely easily as well.

Filing/lathing/grinding down some 6mm GC axles is more work, but you'll have solid axles that won't strip.

Now that I think about it though, you're gonna want to doublecheck that the GC axles aren't too long to tighten down properly in Fiziks. You may be able to get away with filing them down a little if they are.


so, I reckon that Al was the one to raise the cuff pads that much. have new holes been drilled? what's the advantage of it? extra support would be, of course, my guess

That's just how they are stock, which kinda sucks. The spacing on the t-nuts on the cuff pad is too spread out, so you kinda have to choose between ski-high or super-lowrider. Up makes the skate feel bendier/flexier, and down makes them feel stiffer/more like a hardboot cuff. Chris has always had them up, so that's how we set them up. I did down on my last skates and it made the cuffs feel way too hard/the edges dig in for me, but that might be because I have a plate in my ankle, which probably makes me more sensitive to it than many.

[domi]

That's just how they are stock, which kinda sucks. The spacing on the t-nuts on the cuff pad is too spread out, so you kinda have to choose between ski-high or super-lowrider. Up makes the skate feel bendier/flexier, and down makes them feel stiffer/more like a hardboot cuff. Chris has always had them up, so that's how we set them up. I did down on my last skates and it made the cuffs feel way too hard/the edges dig in for me, but that might be because I have a plate in my ankle, which probably makes me more sensitive to it than many.

what the hell?! is this the case just with the JC xsjado's? have you also put the straps higher? I can see the two holes below the strap in which the srcews would usually go

[fast eddie]

Filing/lathing/grinding down some 6mm GC axles is more work, but you'll have solid axles that won't strip.

Now that I think about it though, you're gonna want to doublecheck that the GC axles aren't too long to tighten down properly in Fiziks. You may be able to get away with filing them down a little if they are.

Would it be wrong to assume that 6mm GC axles are hard to come by? I sure don't have any, just a jar full of 6mm K2 axles that I don't even want to mess with.

[CL347BV]

Yeah fuck all that k2 axel machining noise. That would suck so bad.

[justinthursday]

Those things suck. The tool holes are about a tenth of a millimeter deep, so they strip very easily; and the threads are super shallow, so they strip extremely easily as well.

Filing/lathing/grinding down some 6mm GC axles is more work, but you'll have solid axles that won't strip.

Now that I think about it though, you're gonna want to doublecheck that the GC axles aren't too long to tighten down properly in Fiziks. You may be able to get away with filing them down a little if they are.

Now that you mention it they may have been a titch too long.
But I've never had a problem with the hex hole or the threads. Skated HiLos for awhile and fiziks with HiLo bolts.


Would it be wrong to assume that 6mm GC axles are hard to come by? I sure don't have any, just a jar full of 6mm K2 axles that I don't even want to mess with.
I have a shit on on 6mm GC bolts if you want a set. PM me.

[FLaSHBaCK]

Got some black SL cuffs,midsouls, backslides and sliders.

http://i19.photobucket.com/albums/b171/atastyfart/f1560e46.jpg
http://i19.photobucket.com/albums/b171/atastyfart/796741b9.jpg

[Village Idiot]

better than the stock skate.

[domi]

I've wanted to try some powerblades for some time now but I didn't feel like spending that lot of a money on a frame setup. I might just gonna buy the frames and get some other, cheaper freeskate wheels. But for the time being, I decided to create something powerbladish from the parts I have. I removed the riveted frames from some old Roces Streets, that I got only for the wheels. I removed its back part where the brakes (!!!) should be intalled, as with those they looked really gay. I did some grinding and fixed that frame onto my classic thrones with some screws. I know I could have simply left the frame on the Roces. I decided to do all this work for two reasons. First is, I'm inbetween sizes in Roces, so the 8-9 boot is too small, while the 10-10,5 is just huge. My other reason is that without souls the M12 boots look gay as they were used for a lot rec skates and even ice skates. So, then I put on some non-UFS tumor plates for the looks and for those occasional makios and fishes. Finally, I put in my 72mm-ish Rollerblade wheels. I'm gonna buy some blue 80mm Powerslide wheels to finish my setup. Here's what they look like:
http://img694.imageshack.us/img694/9712/20120111113219.jpg

[CL347BV]

That looks fucking awesome domi. Nothing but respect for the creativity it took to see that possibility.

+rep

[*ROYALwithCHEESE*]

Now that you mention it they may have been a titch too long.
But I've never had a problem with the hex hole or the threads. Skated HiLos for awhile and fiziks with HiLo bolts.


I have a shit on on 6mm GC bolts if you want a set. PM me.

Ive skated nothing but hiLos since they came out and never ever had an issue with the middle bolts.

[klebanironcross]

I've had these ST 60s sittin for awhile. Just got the bcam liners and Salo FSK powerstraps the other day and also added red USD cuffbolts. Prolly do the carbon sole mod soon.

http://i641.photobucket.com/albums/uu132/klebanironcross/IMG_2709.jpg

[Village Idiot]

small feet much?

I'm just jelly :)

[fast eddie]

Now that you mention it they may have been a titch too long.
But I've never had a problem with the hex hole or the threads. Skated HiLos for awhile and fiziks with HiLo bolts.


I have a shit on on 6mm GC bolts if you want a set. PM me.

Yes, please. I'll take as many as you'd be willing to get rid of. You have my address, just let me know how much you want for them and shipping. :D

[justinthursday]

Yes, please. I'll take as many as you'd be willing to get rid of. You have my address, just let me know how much you want for them and shipping. :D
I do still have your address! I'll send them out next time I go to the post office!

[domi]

That looks fucking awesome domi. Nothing but respect for the creativity it took to see that possibility.

+rep

thanks, dude!

[m4rcu5]

My Setup: ST8 UFS, Kizer Fluid

http://img808.imageshack.us/img808/1790/st8ufs.jpg (http://imageshack.us/photo/my-images/808/st8ufs.jpg/)

[ryanmatthewdaily]

New souls came in.
http://i15.photobucket.com/albums/a392/mrryandaily/DSC_8541.jpg


Really wasn't feeling the VII's so back to these I go. I still have the bootshells if anyone wants them.

[al dolega]

what the hell?! is this the case just with the JC xsjado's? have you also put the straps higher? I can see the two holes below the strap in which the srcews would usually go

All the recent Conference Xsjados I've seen have been like this, unfortunately.

The picture is a little misleading... the pads are kinda shoved all the way up by the shoes. When the skates are on they'd sit a little lower.

I remove the additional screws (that you can see the hole for) because they ruin the action of the cuff/padding/strap system. It's supposed to have a bit of float when you flex forwards, and those screws inhibit that.

[al dolega]

But I've never had a problem with the hex hole or the threads. Skated HiLos for awhile and fiziks with HiLo bolts.

You're lucky. I've seen soooo many of them have problems. Maybe the later runs were better or something.

[Monday]

http://i15.photobucket.com/albums/a392/mrryandaily/DSC_8541.jpgBadass.

[denotenkoning]

http://i1237.photobucket.com/albums/ff480/DENOTENKONING/IMG_2248.jpg

Thnx to Ivo for the inspiration -> http://ditissoul.nl/

[Village Idiot]

badass

[rollerblazed]

http://i1237.photobucket.com/albums/ff480/DENOTENKONING/IMG_2248.jpg

Thnx to Ivo for the inspiration -> http://ditissoul.nl/

what wheels do you have on there? setup is tight!

[denotenkoning]

^80mm Hyper Concretes

[CL347BV]

^80mm Hyper Concretes
How.

Please share this with us.

[denotenkoning]

http://i1237.photobucket.com/albums/ff480/DENOTENKONING/cutbevel.jpg

[denotenkoning]

NOT mine, Ivo from thisisoul made these:

http://i1237.photobucket.com/albums/ff480/DENOTENKONING/2012-01-03101556.jpg

[Monday]

Skated 72mm with Featherlite 2's on Deshi Carbon. Would have loved to go higher, but I actually needed to remove some of the foam from the bottom of the skate to make the wheels coast freely... ;)

[Village Idiot]

i'm guessing cess slides are out of the question?

[domi]

http://i1237.photobucket.com/albums/ff480/DENOTENKONING/IMG_2248.jpg

Thnx to Ivo for the inspiration -> http://ditissoul.nl/

I just knew 80mm wheels would fit the slimlines! These should be pretty awesome for park.

[John X Campbell]

Got some black SL cuffs,midsouls, backslides and sliders.

http://i19.photobucket.com/albums/b171/atastyfart/f1560e46.jpg
http://i19.photobucket.com/albums/b171/atastyfart/796741b9.jpg

those all black dre powells are sick

[Dr. Zaius]

http://img.photobucket.com/albums/v218/googleyeyes/Photoon1-12-12at634PM.jpg

[DaveB]

http://www.part.lt/img/d6a7f1e796f7fcdda3dcf526d8cb7627550.JPG (http://www.part.lt/perziura/d6a7f1e796f7fcdda3dcf526d8cb7627550.JPG)

Rzrs Dre Powell 2 boot
KIZER Slimline Team Frame white 2011
SCRIBE URETHANE Paul John Wheel 2011
KING CROW Precision Bearings

[justinthursday]

i'm guessing cess slides are out of the question?
Why would they be? I could cess fine in my 72mms on my Carbons.

[Le Irlandais]

Yeh a few people here got them 80 mm wheels as well

[Monday]

i'm guessing cess slides are out of the question?No.

[DaveB]

http://www.part.lt/img/d6a7f1e796f7fcdda3dcf526d8cb7627655.JPG (http://www.part.lt/perziura/d6a7f1e796f7fcdda3dcf526d8cb7627655.JPG)

Rzrs Dre Powell 2 boot
KIZER Slimline Team Frame white 2011
SCRIBE URETHANE Paul John Wheel 2011
KING CROW Precision Bearings

[Pulp]

i'm guessing cess slides are out of the question?
If you don't have working knees, maybe.

[Nodstonothing]

http://img.photobucket.com/albums/v147/blueflowershorts/Lightbox_1324763392936.jpg

[domi]

I'm not sure whether I have posted my beasts, that is my all-terrain blades. So here you go. These are three of my setups: my beasts, my powerblades and my street/park blades. Each of them are for a different specific style of skating, but all of them are fun.
http://img824.imageshack.us/img824/8035/20120115150917.jpg

[CL347BV]

http://i223.photobucket.com/albums/dd95/vandebe/0b1fef7f.jpg

So insanely jealous of your collection of skates.

[domi]

http://i223.photobucket.com/albums/dd95/vandebe/0b1fef7f.jpg

So insanely jealous of your collection of skates.

I have some more, I just don't feel like posting it, I don't want that anyone said that it's all show off.

[CL347BV]

I demand that you post more pics haha or put them in flikr or photobucket an PM me a link haha I won't think your showing off

[domi]

well, not due to popular demand...but here you go, these are my complete ones:
http://img840.imageshack.us/img840/4139/img1887e.jpg
unfortunately I don't have any buckles for my gonzo's.
I'll be converting the the 5k's into UFS...sometime

[CL347BV]

http://i66.photobucket.com/albums/h259/roczuz/Macros/its-beautiful.jpg

I wish I had such a broad collection of rolling stuff.

[nikorzrgt2147]

http://i858.photobucket.com/albums/ab141/sk8ngniko/NewStockwells.jpg
Newest setup, Stockwell 4s, Kizer Fluid Golds, Shredweiser Steve wheels, and Boson Higgs Mindgame antis! Amazing and best setup so far!

[sbchugo]

Worst xsjado.... Only good thing is the shoes in this stockwell 4..

[domi]

and what's wrong with the stockwell 4's? They look OSM

[sbchugo]

the look is ok. Quality of plastic.... buckle is super super flex... No SUPPORT at all in those skates.

[resuk]

Nice work on the swindlers Domi,
i want to convert my swindlers ufs with some nimh souls sometime.

[domi]

Nice work on the swindlers Domi,
i want to convert my swindlers ufs with some nimh souls sometime.

thanks! they don't look this bad. it's just a shitty picture and they are not assembled, the soulplates are not atteched to the boot right now, they are just thrown together for the sake of the photo. I'll post some decent pics. I'm looking forward to seeing your Nihm plate mod!

[nikorzrgt2147]

the look is ok. Quality of plastic.... buckle is super super flex... No SUPPORT at all in those skates.

I highly disagree. They are very supportive!

[so1rok]

Some USD Classic Throne AllStar 07's I'm still using these days. First pair of skates..

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/388893_305245559508118_100000680286902_1013478_118 4201619_n.jpg

Ground Control FL2 with Broskow 4X4 wheels.

[Chris Calkins]

Rebuild

Black cuffs, baseplates and backlides, Red sliders, Red F1 XS frames, Dre BHC wheels(the real ones),

http://img846.imageshack.us/img846/889/33115732515162751903410.jpg

[Monday]

Dre BHC wheels(the real ones) :lol:

[Keith Courage]

I recently switched to Valos. My friend sold me some Kanashimas on the cheap. Nothing special. Sorry for lighting and photog skillz.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/404249_2177440413877_1782884762_1323574_943246349_ n.jpg

[!!!]

it snowed here, and i was bored... cleaned out my closet to build some shelving, and mixed up a bunch of skates' parts while i was at it. this isnt even all of it haha, still so may random parts of all kinds laying around i could build a few more i bet...
http://photoshare.shaw.ca/image/e/2/c/186654/picture12.jpg?r=t
farmer 3 cuff/instep, dw2 wrap, green souls, trirockered uc/star.
http://photoshare.shaw.ca/image/e/2/c/186654/picture1-0.jpg?r=t
dw2 cuff/instep, grey farmer moc, grey basic toe strap. i have brand new black souls i will put on these when i get around to picking up black kaltiks, and the black m1 trinities.
http://photoshare.shaw.ca/image/e/2/c/186654/picture2-0.jpg
mostly stockwell 3 parts, salo frames, tri'd uc wheels
http://photoshare.shaw.ca/image/e/2/c/186654/picture3-0.jpg
mat ledoux gave me these last time i was out in montreal, he lost the other ones haha but they are a mix of farmer1 and stockwell1, dl1 wraps, 1 charcoal and 1 brown salo frame. still furious at myself for missing out on those bulk face wheelz...
http://photoshare.shaw.ca/image/e/2/c/186654/picture4-0.jpg
dl1 cuff, basic instep and toestrap, farmer3 grindparts and wrap, cream 5050 balances, face wheels.
http://photoshare.shaw.ca/image/e/2/c/186654/picture5-0.jpg
farmer 4.1, kaltik, m1 trinity.
http://photoshare.shaw.ca/image/e/2/c/186654/picture6-0.jpg
usd c1, xsjado cuff/padding, white salos, face wheels.
http://photoshare.shaw.ca/image/e/2/c/186654/picture7-0.jpg
white deshi c1, blue souls and brown salos with star bambricks. i need more wheels =(
http://photoshare.shaw.ca/image/e/2/c/186654/picture8-0.jpg
black deshi c1, black soul, charcoal salos. wheeeeelz =(
http://photoshare.shaw.ca/image/e/2/c/186654/picture9-0.jpg
og remz sz7, i had carbon souls on these but put them on a pair of xsjados later on, i wanna redo this mod with red souls when a red frame i actually like hits the market.
http://photoshare.shaw.ca/image/e/2/c/186654/picture10.jpg
minty stockwell 1, but the pads and straps are currently in my carbon mod.
http://photoshare.shaw.ca/image/e/2/c/186654/picture11.jpg

sorry for the wall of pic, figured i may as well take some shitty smartphone pics while they were all out of the closet.

[!!!]

oh, and before I get 10 thousand pm's about the remedyz, no they are FUCKING NOT FOR SALE. :roll::roll:

[CL347BV]

What is this? I don't even....

[justinthursday]

Carbodows/Xsjabons are interesting.

[gatsby]

keeping the company Xsjados afloat, single-handed

[so1rok]

I recently switched to Valos. My friend sold me some Kanashimas on the cheap. Nothing special. Sorry for lighting and photog skillz.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/404249_2177440413877_1782884762_1323574_943246349_ n.jpg

Beautiful!

Always wanted them.. guess I just totally slept when they were in stores.

[domi]

Carbodows/Xsjabons are interesting.

that is a really rad concept. JT, I'd love to see you re-do it so that it looked more clean and more beautiful.

oh, and !!!,
massive and wonderful collection you got there!

[Monday]

Post your setupz (Picz)